Pre-Pressurized Accumulator Tank (0.75L, 125PSI), Flow Control Inner Bladder, Reduced Pump Cycling, Suitable for RV, Boat, Travel Trailer, Caravan.

Introduction Pair our accumulator tank with any of our water pressure diaphragms pumps to improve any water system. This food-grade tank has a bladder that expands as your pump functions, allowing for smoother water delivery to your fixtures. The accumulator tank comes pre-pressurized at 10 PSI. For optimal usage, please set the accumulator tank to ~3 PSI below your water pump's cut-in pressure and make sure it is connected to the outlet of the pump. This product includes adapter fittings to 1/2" Barb. Details Composed of food-grade, FDA-safe material. Made for drinking water applications. Reduces pump cycling Increases pump life Reduces strain on plumbing Reduces strain on the battery Reduces noise of your water system Allows for better control of hot water Technical specifications Ports: 13mm (1/2") Male Thread, with adapters to hose barb Bladder precharge pressure: 10 PSI Maximum internal pressure: 125 PSI FDA food-grade material Air valve: Standard Tire Valve Dimensions: 7.87" x 5.00" x 4.94"

• Universal RV pre-pressure accumulator tank: Pressure value 10psi-125psi, Suitable for most pumps on the market, Constant pressure, Reduce pump circulation, and solve the pulsation problem of RV or fresh water system on board.
• Extend the service life of the pump: Store the water pressure of the water pipe during the peak period, Buffer the impact damage caused by the high water pressure to the pump, Reduce the sound, reduce the frequent start of the pump, and provide a more stable water supply.
• Wide range of applications: Pre-inflated pressure 10psi (0.7bar) in the tank before leaving the factory, with RV/Caravan/Boat pressurized water system, Food and beverage filling and liquid delivery and any other pressurized system compatible to help you reduce frequent pump starts.
• Easy to install: Please read the instructions carefully before use. Adjust the air pressure in the water tank to be lower than the pressure of the pump switch 3psi (0.2bar), Built-in two wing nut fittings, Connect the wing nut fittings to the energy storage One end of the accumulator tank, The hose is fixed by the clamp,and the hose connects the accumulator tank and the pump.
• Compatible with most pumps with 1/2"-14 NPT (Male) outlet on the market.